簡単アーシング Dsparkディスパーク
  • プラグコード用
  • ダイレクトコイル用
  • 製品仕様
  • ラインナップ
  • 装着例

[V]カットが強力なスパークを放つ!パワーアップを実現するハイパフォーマンスプラグ、スプリットファイア・シリーズ

Improves combustion efficiency!

Increases horsepower at all RPM!

Improves torque at low and middle RPM and stabilizes voltage!

Excellent starting performance and stable idling!

Very simple installation for both Plug Wire and Direct Coil!

D-spark(ディ・スパーク)は点火エネルギーの抵抗になるノイズを除去しシステムの持つパフォーマンスを最大限に引き出すことを可能にするシステムです。

For Plug Wire

High voltage current boosted by coil flows through Plug Wires, and reverse induced current takes place. Such reverse current prevent smooth flow of required current and decreases the original performance of Plug. This unit produces a stronger spark. It is applicable to original plug wire and also most of normal plug wires.

For Direct Coil

Small current is charged on the iron core of Direct Coil, and also slight leakage occurs. Consequently, the direct coils are not performing as it is originally designed. Installation of D-Spark eliminates charging of current and leakage at the iron core.It stabilizes the difference of potential among each coil and maximizes the original performance. Then it brings stronger spark.

Product Specification

Name of Product D-Spark
Size of Package (H)310mm×(W)145mm×(D)45mm
Weight 200g~300g (it varies depending on item's number
Component Wire with SplitFire Logo/ tie band

Lineup

Item Number Name of Product Remarks
DSK-P001

Universal Type for 4 Cylinders Engine with Plug Wire System (5-7mm Dia.)

 
DSK-P002

Universal Type for 4 Cylinders Engine with Plug Wire System(8-10mm Dia.)

 
DSK-D001

Universal Type for 4 Cylinders Engine with Direct Coil System

 
DSK-D002

Universal Type for 6 Cylinders Engine with Direct Ignition System

 
DSK-D003

Universal Type for 3 Cylinders Engine with Direct Coil System

 
DSK-D004

Universal Type for Boxer Engine with Direct Coil System

 

Example of Installation

Integra, Plug Wire for 4 Cylinders

Clamp over the Plug Wire for tightening.

Fix the wire at the grounding point such as engine head and connect the other end terminal with the battery negative.


For Plug Wire

For Direct Coil


PRIMERA, For 4 Cylinders with Direct Coil System

Tighten with the bolt of fixing the coil

Fix the wire at the grounding point such as engine head and connect the other end terminal with the battery negative.